|
|
Metal Finishing Services |
|
|
Ohio Laser has
installed a new metal surface sanding, metal
finishing and laser oxide removal system. The
machine is capable of handling material up to 48
inches wide by ¾ inch thick and can perform the
following treatments:
- Oxide removal of laser cut surfaces.
This is a requirement for any laser cut edge
that requires powder or wet paint adhesion.
The machine removes all loose oxide from
steel laser cut parts ranging in thickness
from 7 ga. (4.5mm) through ¾” (19mm) plate.
- Edge rounding. All laser cut or punched
products can now benefit from radiused edges on
most external and internal edges. This helps in
not only removing any burrs but also helps in
preventing paint from chipping at sharp or very
square laser cut or punched edges.
- Surface graining. We now offer various
grained surface finishes on both the top and
bottom of all laser cut and punched products.
The machine can also produce a non-directional
finish on both surfaces.
- Deburring. Laser cut and punched edges can
now be deburred with or without plastic coating.
A superior part can now be manufactured for
almost any application.
Please call Randy at 614-873-7030 to
discuss how this machine can benefit you!
|
Ohio Laser features the most advanced flat laser cutting, tube cutting and pipe cutting capabilities in the Midwest, and offers a complete range of value added fabrication services. Please contact us today to learn more about how we can assist your company! |
|
 |
Ohio Laser LLC
8260 Estates Parkway Plain City, OH 43064
Email Us
Phone: 614-873-7030 / Fax: 614-873-7040
Copyright © 2009 Ohio Laser
LLC. All Rights Reserved. |
|
|
